Dosing/ Chemical Transferring Pumps
RECIPROCATING TYPE PUMPS
Design Feature / benefits of Plunger pumps
- Design Feature / benefits of Plunger pumps
- For plunger pump discharge pressure to 200 Kg/cm2g (3000 psi), ideal for high pressure systems
- Pneumatic and electric stroke length control available, automatic capacity control in response to standard 4-20MA process signal.
- Explosion proof motors available suitable for use in hazardous atmospheres.
- Low flow rates accurate, reliable chemical feed.
- Accuracy ± 2%
Range of Capacity -
OUR diaphragm Pumps are available for 0.5 Ltrs to 12,000 LPH and pressure up to 100 Kg/cm2 in various model to suits client application.
The Max Working Pressure
450 Kg/Cm2, Max Discharge – 500 Ipm,Max Power – 150 Hp,Stroke Length 125 mm, SPM100-300.
4. Electromagnetic Pumps
OUR THESE Pumps are used in low pressure and low flow applications. Flow range available 1.0-50.0 LPH, Pressure range (10-0.5 Kg/cm2g). The pumps can be operated by 230V, 50Hz, single phase. Repeatability ±3%, Accuracy ±1%. Versatile choice of materials for liquid heads: PP, PVC, Teflon, SS304, SS316S.
SCREW TYPE PUMPS
PROGRESSIVE CAVITY PUMPS
1.) KM SERIES
Description
OUR KM Series pumps are built with rugged gear-type universal joint which is the effective solution to handle heavy radical thrust loads. This design ensures best performance with very minimal maintenance, low wear & Tear of rotating parts and longer life of pump.
Salient Features
- Positive displacement
- Non-pulsating flow
- Accurate, repeatable flow
- Head independent of pump speed
- Low NPSH requirement
- Self-priming
- High suction lift upto 28 feet
- particles upto 2.8" in diameter
- Reversible
- Viscosities up to 1,000,000 cps
- Wide temperature range to 4000 F
- Ideal for metering applications
Applications
- Allows Gland Pocking leakage to be flushed away from the pump preventing severe damage to seals and packing.
- Permits controlled leakage of process or flush fluid to reduce friction and dissipate heat.
- Inlet and outlet connections for flushing leakage away to drain.
- Ideal for waste water treatment.sugar, petrochemical and paper industry applications.
- Available with flanged and wide throat version with or without shaft sleeves.
Materials Of Construction
| Pump Body | Cast Iron, Cast Steel, CF8, CF8M |
| Internals, Including Rotor | Alloy Steel, Tool Steel, AISI 304, AISI 316 |
| Stators | EPDM (to 2600F) Fluoroelastomer (to 4000F) Nitrile (to 2100F) Natural Rubber (to 1850F) |
1.) KYM-KH SERIES
Applications
- Water & Wastewater treatment
- Pulp & Paper
- Chemical
- Food
- Petroleum
- Building Materials
- Coal Industry
- Genera
Technical Data
Various materials are available to adapt the pump optimally to the medium.
| Pump casing | GG-25 1.4408 CF8M (1.4581) WCB 1.4571 Steel St. 37 1.4462/AFSI S3 1803 |
| Rotor | C 45 hcp Tool Steel 1.4571 SS 316 1.4462 |
| Shaft |
Shaft1.4021 Carbon Steel 1.4571 SS 316 1.4462 |
| Stator | Buna (SBR) Perbunan (NBR) Perbunan, white (NBR) Therban (HNBR) Viton® (FPM) Butyl-rubber (IIR) Hypalon (CSM) EPDM-rubber (EPDM) |
3.) KL-SERIES
Salient Features
- Cost-effective open pin joint design.
- Fluid temperature range to 3500 F/1750 C
- Steady flow under wide NPSH variations.
- Handle solids upto 1" diameter
- Reversible rotation
- High suction lift to 28'
- No pistons, valves are timing gears to wear out or gum up.
- Self-priming to prevent vapour or air lock
- Low shear pumping
- Viscosities over 1,000,000 cps.
Applications
- Water & Wastewater treatment
- Pulp & Paper
- Chemical
- Food
- Petroleum
- Building Materials
- Coal Industry
- General
Description
OUR Pumps takes its place among the largest manufactures of Progressive Cavity Pumps. Our expertise in designing and manufacturing ensures you of an extensive range of Retrofit Spare Parts for Progressive Cavity Pumps of all types and all brands of pumps like Netzsch/ Mono / Seepex/ Moyno / Allweller / Wongen etc.
A.) Rotor Material Range
- Stainless Steel, Tool Steel and Exotic Alloy
B.) Stator Material Range
- Natural, Nitrile, Food Grade, White Nitrile, HNBR, EPDM, Chlor - Sulphonated Elastomer, Floroelastomers and AFLAS
C.) Other Parts Material
- Stainless Steel, Tool Steel and Exotic Alloy
CHEMICAL TRANSFER PUMPS
1. Polypropylene Pumps
- OUR these pumps are available in different mounting constructions like horizontal bare pump, monoblock pump and vertical pump, the pumps wetted parts made from molded polypropylene material. These Pumps are supply with PTFE gland packing or mechanical seal fitted Polypropylene parts are manufactured by solid injection molding process.
- Mechanical seal are provide of ceramic / GFT face or silicon face with teflon bellow as per application
- Gland packing are used of PTFE impregnated orPTFE Graphite reinforced as per application suitable for continuous service, The Pumps casing are provide with external metal ring for construction stability.
- The usages of these pumps are in Water treatment plant, Effluent treatment, Filter press for dyes and chemicals, Fertilizer plants thermal and atomic power plants, Drugs & pharmaceutical industries, Re-scaling of tubes, Scrubbing of corrosive gases like cl2, br, I so2, nh3, f2 etc., Excellent for vacuum ejectors, Transferring of concentrated hcl from road tankers, Paper & pulp industries, Pickling plants & caustic soda plants.
Avialable in capacities upto 180 M3/Hr., Head – uo to 60 Mtr. Pump Sizes – DN25 mm To 150 mmSpeed – N1440/2880 rpm at 50 Hz & 1750/3500 rpm at 60 HzTemperatureUp to 110’C.
3. Hydro Tests Pumps (with Motor/without Motor)
A.) With Motor
- These pumps are for boilers, pressure vessels, c.i. Mains, casting parts, Gas cylinder, pipes & tubes parts, Subject to hydro test pressure.
The pumps are Electric motorized driven system, Totally enclosed drive mechanism, Heavy duty precision gear box, Large air chamber, Self oiling system quick acting relief valve.
B.) Without Motor
- These pumps have Pressure release cock made from brass metal, The Discharge pressure hose with attachment of 1/2" bsp length 2 mtrs., Stainless steel glycerin filled pressure gauge with 4" inch dial, Suction & discharge valve (nrv)made form stainless steel material.
4. Self Priming Non Clog Mud Pump
- These pumps are for Effluent treatment, sewage plants, dyes and intermediate industries., Dewatering docks, ports, vessels, swamps, basements, trenches, construction sites, swimming pools etc., Pumping petroleum products like I.d.o., Diesel, and petrol kerosene etc.
- Transfer of chemicals, solvents, effluents, hot water, chilled water, condensate etc.
- The Pumps are SPECIAL FEATURES OF SELF PRIMING NON CLOG MUD PUMP The pumps are Graded casting & en-8/ss-410 shaft increase service life.
